Appliances

The Max Pro bain marie is a stainless steel countertop unit designed for wet heat holding in professional catering and horeca environments. Its seamless, deep-drawn construction supports practical daily use, while the manually controlled thermostat offers infinitely adjustable temperature control. Please note that GN pans are not included. Countertop bain marie for use with water Suitable for 1/1 GN size: 53 x 32.5 cm Compartment depth/content height: 20 cm Made of stainless steel Seamless and deep-drawn design Manual thermostat with infinitely adjustable control Electrical connection: 1x (220-240V)-1N Frequency: 50 Hz Power: 1000 W Supplied with plug and power cable Dimensions: 39.9 x 65.5 x 30.6 cm (W x D x H) This model is a practical choice for operators looking for a compact electric bain marie for countertop installation. The drain tap is available on demand.

Read more less

The Mach bain marie is a stainless steel built-in model designed for professional catering and commercial kitchen installations. Suitable for wet operation, it offers manual thermostat control with infinitely adjustable temperature settings and is supplied without GN pans. Built-in dimensions: 34.5 x 37.6 x 30 cm Well size: 35.4 x 32.5 cm, suitable for 2/3 GN Pan depth: 15 cm Stainless steel construction Electric power: 2.000 W Power supply: 1x (220-240V)-1N Frequency: 50 Hz Infinitely adjustable manual thermostat For use with water Equipped with drain valve Supplied with plug and power cable This built-in bain marie is a practical choice for keeping food at serving temperature in a professional horeca setup. The integrated drain valve supports convenient emptying after use, while the built-in configuration helps create a neat and efficient serving line or workstation. Please note that the unit is delivered without GN pans and that the stated built-in dimensions are subject to minimal manufacturing defects.

Read more less

This Stilfer heated display showcase is a compact bain marie warming display case for presenting hot food in professional catering and horeca environments. Made of stainless steel and fitted with safety glass, it is designed for use with 1/3 GN containers up to 40 mm deep and features thermostatic temperature adjustment up to 90°C. Stainless steel bain marie display case for hot food presentation Equipped with safety glass Manual thermostat control for adjustable warming Temperature range up to 90°C Suitable for 1/3 GN containers measuring 32.5 x 17.6 cm Suitable for GN containers with a maximum depth of 40 mm Overall dimensions: 114.5 x 35.5 x 23 cm Electrical connection: 220-240V, 50/60 Hz Power: 1600 W This hot food display is a practical choice for keeping prepared dishes warm while maintaining clear product visibility on the counter. Its compact format makes it suitable for service areas where efficient use of space is important. Please note that GN containers are not included.

Read more less

The Mach meat slicer with Ø195 mm blade is designed for professional food preparation where clean, consistent slicing is essential. Made from anodized cast aluminium alloy, it supports high hygienic standards, while the gravity-feed design and hollow-ground steel blade help deliver precise cutting results. Compact commercial slicer with a Ø195 mm blade Constructed from anodized cast aluminium alloy Gravity-feed operation for smooth product guidance Hollow-ground steel blade for accurate slicing Infinitely adjustable slicing thickness from 0 to 15 mm Maximum cutting diameter: 145 mm Manual operation with V-belt drive Equipped with a main switch with indicator light Blade sharpener included as a feature; the sharpening device is supplied separately Electrical connection: 1x (220-240V)-1N Frequency: 50/60 Hz Power: 149 W Dimensions: 36.0 x 54.0 x 36.0 cm (W x D x H) Its compact footprint makes this slicer a practical choice for professional kitchens, delis and horeca environments that need reliable slicing performance without taking up excessive workspace. With manual control and continuously adjustable thickness, this Mach slicer is well suited to operations that require flexibility and consistent presentation across a range of sliced products.

Read more less

The Max Pro chocolate warmer is designed for gentle bain-marie heating of chocolate in professional catering and horeca environments. Its compact, attractive design and low maximum temperature make it suitable for melting and heating chocolate with controlled, even warmth. Made from stainless steel Bain-marie operation for indirect heating with stainless steel water pans Separate heating regulation for each pot Infinitely adjustable manual thermostat control Temperature range from 2°C to 40°C Maximum temperature of 40°C, suitable for chocolate melting and warming Capacity: 4.0 litres Electrical connection: 220-240V Frequency: 50 Hz Power: 500 W Dimensions: 50.3 x 29.0 x 29.0 cm (W x D x H) This countertop chocolate warmer offers precise low-temperature control for professional foodservice preparation. Its stainless steel construction and manual adjustment make it a practical choice for kitchens that need reliable chocolate melting and holding.

Read more less

The SpidoCook Spidoglass contact grill combines a smooth lower plate with a ribbed upper plate, making it ideal for fast, consistent grilling in professional kitchens. Its vitroceramic heating surface reaches temperature quickly, while the ribbed top helps create an attractive grilled finish. Work surface: 25 x 25 cm Plate configuration: smooth bottom plate and ribbed top plate Heating system: ceramic heating with ceramic glass plate Temperature range: adjustable from 120°C to 400°C Control: manual thermostat control with manual operation Electrical connection: 1x (220-240V)-1N, 50/60 Hz Power: 1.500 W Dimensions: 33.1 cm wide, 45.8 cm deep, 17.6 cm high Features: main switch, grease tray, plug and power cable Included: stainless steel scraper Designed for straightforward manual use, this commercial contact grill offers responsive heat and practical operation for busy horeca environments. The ceramic glass grilling surface supports quick heat-up, helping streamline service during peak hours. With its compact footprint and professional plate combination, this Spidoglass model is a strong choice for operators looking for efficient countertop grilling performance.

Read more less

The SpidoCook Spidoglass contact grill with smooth top and bottom plates is designed for professional kitchens that need fast heat-up and precise manual operation. Its vitroceramic heating surface quickly reaches the selected temperature, while the smooth ceramic glass plates provide an even contact surface for grilling and finishing. Smooth top and bottom grilling surfaces Vitroceramic heating surface for rapid temperature build-up Ceramic heating system with manual thermostat control Temperature range from 120°C to 400°C Work surface: 25 x 25 cm Supplied with stainless steel scraper Integrated grease tray Main switch fitted Electrical connection: 1x (220-240V)-1N Power: 1,500 W Frequency: 50/60 Hz Supplied with plug and power cable Dimensions: 33.1 cm wide, 45.8 cm deep, 17.6 cm high This manual contact grill is a practical choice for horeca operations looking for controlled grilling performance in a compact countertop format. The smooth ceramic glass plate construction supports straightforward day-to-day use and cleaning. With its compact footprint and professional Spidoglass design, this model fits well into commercial kitchen setups where speed, consistency and ease of operation are important.

Read more less

The CaterChef heat shade is a freestanding countertop model designed to keep plated dishes, soups and snacks at serving temperature for longer. It delivers direct, penetrating heat without drying out the food, while the copper finish and stainless steel construction give it a professional look for front-of-house or pass use. Freestanding model with a sturdy stainless steel base Flexible arms make it easy to adjust the lamp position Height adjustable up to 82 cm Equipped with a main switch on the base Stainless steel construction in a copper finish Dimensions: 46 cm wide, 48.6 cm deep and 61 cm high Lamp shade diameter: 15.6 cm Power supply: 1x (220-240V)-1N Frequency: 50 Hz This heat shade is a practical solution for professional catering environments where prepared food needs to remain warm and presentable during service. Its adjustable design helps direct heat exactly where it is needed on the countertop.

Read more less

The CaterChef heat shade is a freestanding countertop warming solution for professional foodservice use. It delivers instant, penetrating heat to help keep dishes, soups and snacks warm for longer without drying out, while the flexible arms make it easy to position the lamps where heat is needed. Freestanding countertop model for serving stations, pass-through areas and plated food holding Provides instant heat to help maintain serving temperature Designed to keep food warm longer without drying out Heavy stainless steel base for stable placement Finished in chrome Integrated main switch in the base Height adjustable up to 82.0 cm Product dimensions: 61.0 cm high, 46.0 cm wide and 48.6 cm deep Lamp shade diameter: 15.6 cm Electrical connection: 1x (220-240V)-1N, 50 Hz With its stainless steel construction, adjustable design and integrated switch, this CaterChef heat shade is a practical choice for commercial kitchens, buffets and service counters where food needs to stay ready to serve.

Read more less

The MilanToast toaster grill is a compact stainless steel countertop unit for professional sandwich preparation, grilling and au gratin finishing. Its heating elements can be operated separately for more flexible use, while the removable rear wall helps make loading and cleaning easier. Suitable for sandwiches, grilling and au gratin preparation Separately operated heating elements for flexible heat control Manual operation with manual timer Equipped with a drip tray Includes sandwich holders Stainless steel construction Filling height: 9.5 cm Dimensions: 43.0 x 23.0 x 35.0 cm Electrical connection: 1x (220-240V)-1N Frequency: 50/60 Hz Power: 2,700 W Designed for commercial kitchen and horeca use, this manually operated toaster grill offers practical day-to-day performance in a space-saving format. The combination of independent heating control, removable rear wall and drip tray supports efficient operation during service.

Read more less

The Neumärker multi baking appliance is a versatile commercial countertop unit for professional kitchens, snack bars and horeca operations. Designed as a solo appliance, it works with easily exchangeable cast iron insert sets available separately, allowing the system to be adapted for different baking applications such as waffles and crêpes. A digital timer with acoustic signal supports consistent operation during service. Constructed in stainless steel for professional foodservice environments Interchangeable baking tray system for use with separate cast iron inserts Suitable for creating a flexible baking setup for different products Manual thermostat control with infinitely adjustable temperature setting Temperature range from 50°C to 300°C Digital timer control with sound signal Equipped with independent zones Fitted with a main switch Electrical connection: 1x (220-240V)-1N Frequency: 50/60 Hz Power: 2,800 W Dimensions: 32.0 cm wide, 34.0 cm deep, 27.5 cm high This multi baking appliance is a practical choice for operators who want flexibility from one compact machine. Its adjustable temperature control, digital timer and interchangeable insert concept make it well suited to professional baking preparation where menu variation and efficient workflow are important.

Read more less

The CaterChef contact sandwich toaster is designed for preparing toasted sandwiches by baking the filling between two tightly closing plates. This sealed contact method helps retain aroma and flavour, and also makes the appliance suitable for a variety of savoury filled products. Stainless steel construction for professional kitchen use Non-stick coated plates for smoother release and easier cleaning Manual operation with manual thermostat and timer control Infinitely adjustable temperature from 0°C to 300°C Equipped with a main switch Electrical connection: 1x (220-240V)-1N, 50 Hz Power: 1,550 W Dimensions: 37.9 cm wide, 32.3 cm deep, 22.2 cm high This compact contact toaster is a practical choice for cafés, lunchrooms and other horeca environments where fast preparation and consistent results are important. The manually adjustable controls allow you to adapt the heat to different breads and fillings. With its stainless steel body and non-stick baking surface, this CaterChef model fits well into busy commercial foodservice operations looking for a straightforward sandwich toasting solution.

Read more less

The Santos Jumbo citrus juicer is designed for continuous juice production in professional catering and horeca environments. This chrome-finished press starts automatically when the fruit is pressed onto the cone, helping to keep service fast and efficient. With a design that is easy to disassemble, it also supports straightforward cleaning in busy commercial kitchens. Automatic start when citrus fruit is pushed onto the cone Built for high-capacity, continuous production Juice-contact parts are acid-resistant and taste-resistant Current-conducting parts are protected against dripping juice Includes press cones for orange, grapefruit and lime Main switch fitted Power: 230 W Speed: 1500 rpm Power supply: 1x (220-240V)-1N Frequency: 50/60 Hz Noise level: 65.0 dB Spout height: 21.2 cm Dimensions: 20.5 cm wide, 30.5 cm deep, 49.0 cm high Colour: chrome Thanks to its automatic operation and high processing speed, this Santos citrus press is well suited to locations where fresh juice needs to be prepared quickly and consistently. The protected electrical components and juice-resistant contact surfaces make it a practical choice for daily commercial use. If you need a professional citrus juicer with easy cleaning and versatile cone options, the Santos Jumbo offers a reliable solution for orange, grapefruit and lime juicing.

Read more less

The Santos Jumbo citrus juicer is built for high-capacity, continuous juice production in professional catering environments. This gray press starts automatically when the fruit is pushed onto the cone, helping to keep service fast and efficient. Parts that come into contact with juice are acid- and taste-resistant, while the current-carrying components are protected against dripping juice. Automatic start when citrus fruit is pressed onto the cone Designed for continuous production Easy to disassemble for straightforward cleaning Supplied with press cones for grapefruit, lime and orange Spout height: 21.2 cm Speed: 1500 rpm Power: 230 W Power supply: 1x (220-240V)-1N Frequency: 50/60 Hz Noise level: 65.0 dB Dimensions: 20.5 x 30.5 x 49.0 cm Equipped with a main switch Its compact footprint makes it suitable for professional bars, cafés and kitchen workstations where reliable citrus pressing is needed throughout the day. The combination of automatic operation, easy cleaning and juice-resistant contact parts makes this Santos citrus juicer a practical choice for commercial use.

Read more less

The Mach bain marie is a built-in electric unit for professional catering and commercial kitchen installations. Made from stainless steel, it is designed for wet operation and features manual thermostat control with infinitely adjustable temperature regulation. Please note that GN pans are not included. Built-in model for integration into a counter or service line Stainless steel construction Suitable for use with water Manual thermostat with infinitely adjustable control Independent heating zones Usable well size: 70.6 x 32.5 cm, suitable for 4/3 GN Well depth: 15.0 cm Overall dimensions: 34.5 x 72.3 x 30.0 cm Electrical connection: 1x (220-240V)-1N, 50 Hz Power: 2,000 W Supplied with plug and power cable Equipped with drain valve Built-in dimensions in mm are subject to minimal manufacturing deviations This built-in bain marie is a practical choice for maintaining food at serving temperature in buffet counters, pass-throughs and other professional foodservice setups. The integrated drain valve supports convenient emptying after use, while the adjustable thermostat allows straightforward temperature control during service.

Read more less

The MilanToast toaster grill is designed for professional kitchens that need flexible toasting, grilling and au gratin preparation in one compact countertop unit. Its quartz heating elements can be controlled separately at the top and bottom, while the removable rear wall helps simplify loading, handling and cleaning during service. Constructed in stainless steel Separate operation of the upper and lower quartz heating elements Suitable for sandwiches, grilling and au gratin dishes Manual operation with manual timer control Timer range up to 75 minutes Equipped with a drip tray Filling height: 9.5 cm Dimensions: 43.0 x 23.0 x 35.0 cm (W x D x H) Electrical connection: 1x (220-240V)-1N Frequency: 50/60 Hz Power: 2700 W With its practical manual controls and versatile heating configuration, this toaster grill is a functional choice for horeca operations looking for reliable countertop performance. The combination of stainless steel construction, integrated drip tray and removable rear wall supports efficient day-to-day use in busy catering environments.

Read more less

The Santos bar blender is designed for professional drink preparation with a 2.4 litre polycarbonate jug and a compact black housing. Its digital touchpad control panel combines fast operation with consistent results, while the sound enclosure helps keep noise output low during service. 2.4 litre capacity Digital touchpad control panel 5 programmable buttons plus pulse function 30 pre-programmed recipes New recipes can be added via software and USB stick Sound enclosure for quieter operation Machine stops automatically when the enclosure is opened Speed range: 2,500 to 15,000 rpm Power: 1,010 W Power supply: 1x (220-240V)-1N Frequency: 50/60 Hz Noise level: 63 dB Polycarbonate construction With pouring spout Dimensions: 20.0 x 24.7 x 44.1 cm (W x D x H) This programmable commercial blender is well suited to bars, cafés and other horeca environments where speed, repeatability and quieter blending are important. The combination of recipe storage, pulse control and a wide rpm range supports flexible preparation of mixed drinks and other blended beverages. Its compact footprint makes it easy to position on the counter, while the enclosed design and automatic stop function support practical day-to-day use in busy service areas.

Read more less

The CaterChef thermal blender combines high-speed blending with induction heating in one compact appliance for professional kitchen preparation. Designed for both hot and cold applications, it is suitable for tasks such as cooking, steaming, and preparing soups, sauces, and vegetables. The 2.0 litre stainless steel beaker is removable and fitted with a removable blade set and secure lid for practical daily use. Capacity: 2.0 litre Heating range: accurate induction heating from 37°C to 120°C Speed range: 50 to 11,000 rpm Operation: touchscreen and rotary knob with digital control Integrated functions: built-in weighing system and timer Construction: stainless steel beaker with removable blade set Accessories supplied: spatula, whisk, rice basket and steamer Electrical connection: 1x (220-240V)-1N Frequency: 50/60 Hz Power: 1,500 W Dimensions: 39.0 x 32.0 x 43.6 cm Finish: white with stainless steel components With its combination of blending, heating and weighing functions, this CaterChef thermo blender supports efficient workflow and versatile preparation in commercial kitchens. Its digital operation and removable components make it a practical choice for chefs who need precise control across a wide range of kitchen tasks.

Read more less

The Santos citrus juicer is designed for fast, practical juice extraction in professional foodservice environments. Using centrifugal force, it helps extract juice from halved oranges and lemons while the pulp remains in the removable press cone. Operation is simple and safe: press the lever down to start the cone rotating, and lift it to stop immediately. The unit is also easy to disassemble for straightforward cleaning. Professional citrus juicer by Santos Suitable for oranges and lemons Made from stainless steel with a black finish Supplied with orange press cone Rotation speed: 1500 rpm Power: 230 W Power supply: 1x (220-240V)-1N Frequency: 50/60 Hz Noise level: 65 dB Spout height: 13.5 cm Dimensions: 20 x 30 x 38 cm (W x D x H) Equipped with a main switch With its compact footprint and lever-activated operation, this juicer fits well into bars, breakfast service areas and commercial kitchens where fresh citrus juice is prepared regularly. The removable press cone and easy-to-take-apart construction support efficient daily cleaning, helping keep service moving smoothly.

Read more less

The Santos citrus juicer is a professional solution for quickly extracting juice from halved oranges and lemons. Using centrifugal force, it helps obtain maximum juice while the pulp remains in the removable press cone. Operation is straightforward and safe in busy horeca and catering environments: press the lever to start the cone rotation, and lift it to stop immediately. The unit is also easy to disassemble for fast cleaning. Brand: Santos Model references: Super Deluxe, #10 Construction: stainless steel with chrome finish Power: 230 W Power supply: 1x (220-240V)-1N Frequency: 50/60 Hz Speed: 1500 rpm Noise level: 65.0 dB Dimensions: 20.0 x 30.0 x 38.0 cm (W x D x H) Spout height: 13.5 cm Included: press cone for orange Control: fitted with main switch Its compact footprint makes this citrus juicer suitable for professional counters where reliable performance and easy handling are important. The removable press cone and simple operating system support efficient daily use in commercial kitchens, bars and juice service areas. For operators looking for a robust electric citrus juicer from Santos, this model combines practical dimensions, straightforward lever operation and easy cleaning in one professional countertop machine.

Read more less

The Santos citrus juicer is built for fast, efficient juice extraction in professional kitchens, bars and horeca environments. Using centrifugal force, it presses the last drops from halved oranges and lemons while the pulp stays in the removable press cone. Operation is simple and safe in daily service: press the lever down to start the cone, and lift it to stop immediately. The unit is also easy to disassemble for straightforward cleaning. Made by Santos Suitable for oranges and lemons Constructed in stainless steel with a gray finish Equipped with a removable press cone Includes a press cone orange Speed: 1500 rpm Power: 230 W Electrical connection: 1x (220-240V)-1N Frequency: 50/60 Hz Noise level: 65.0 dB Spout height: 13.5 cm Dimensions: 20.0 cm wide, 30.0 cm deep, 38.0 cm high Fitted with a main switch With its compact footprint and lever-activated operation, this Santos Super juicer is a practical choice for service areas where speed and ease of use matter. The stainless steel construction and easy-clean design make it well suited to busy commercial beverage and foodservice preparation stations.

Read more less