Storage & Transport

Built for busy professional kitchens, the HENDI Kitchen Line sink table with shelf combines a durable stainless-steel worktop with an integrated sink bowl on the right-hand side—ideal for streamlined prep, rinsing and hygiene tasks in compact work areas. The bolted, self-assembly construction makes it easy to transport, store and install on site, while the fixed lower shelf adds practical storage and reinforces the overall frame. Overall size: 1000 x 600 x (H) 890 mm Sink bowl positioned on the right side Sink dimensions: 400 x 400 x (H) 250 mm Pressed sink bowl from a single sheet of stainless steel for easy cleaning Standard siphon opening in the bowl base: Ø50 mm Tap hole: Ø30 mm 40 mm splashback to help protect the wall from stains Fixed (non-adjustable) lower shelf; clearance from floor to shelf underside: 160 mm Approx. permissible load on tabletop and shelf: 70 kg/m² Sturdy legs made from 40 x 40 mm profiles Adjustable feet: +25 / -5 mm for stable positioning on uneven floors Net weight: 19.635 kg This sink table is well suited for dish rinsing points, vegetable wash stations and general hygiene areas where you need a reliable stainless-steel surface with integrated drainage. The lower shelf keeps detergents, tubs or small equipment close at hand without sacrificing floor space. For best results, assemble according to the bolted design for a rigid frame, and keep the stainless-steel surfaces clean with suitable non-abrasive products to maintain a hygienic finish in daily horeca use.

Read more less

Build a reliable wash-up and prep point in your professional kitchen with the HENDI Kitchen Line sink table with shelf. This stainless-steel sink unit features the bowl on the left-hand side, a practical splashback, and a fixed lower shelf for extra storage—ideal for keeping hygiene workflows smooth in busy horeca environments. Brand: HENDI (Kitchen Line) Overall size: 1000 x 600 x (H) 890 mm Sink bowl positioned on the left side Pressed sink bowl from a single sheet of stainless steel for easy cleaning Sink dimensions: 400 x 400 x (H) 250 mm Standard siphon opening in the bottom: Ø50 mm Tap hole: Ø30 mm 40 mm high splashback to help protect the wall against stains Bolted construction for self-assembly; can be disassembled for easier transport and storage Fixed (non-adjustable) lower shelf; clearance from floor to shelf underside: 160 mm Approx. permissible load on tabletop and shelf: 70 kg/m² Legs made from 40 x 40 mm profiles Adjustable feet range: +25 / -5 mm Net weight: 19.385 kg The integrated shelf adds convenient space for storing cleaning supplies, containers, or small kitchen equipment, while also reinforcing the structure for stable day-to-day use. With stainless-steel construction throughout, this sink table is well suited to demanding back-of-house areas where durability and easy wipe-down hygiene are essential. Designed with ready-made cut-outs for a tap and trap, it simplifies installation planning and helps speed up set-up in new kitchens, renovations, or temporary catering operations where transport and storage efficiency matter.

Read more less

Keep prep, plating and service moving with the HENDI Kitchen Line mobile table with shelf—an all-stainless-steel workstation designed for busy professional kitchens, catering operations and back-of-house environments where flexibility and hygiene matter. With smooth-rolling castors, a sound-dampened worktop and an open design without backsplash, it’s easy to position anywhere and work comfortably from any side. Brand: HENDI (Kitchen Line) Mobile stainless-steel work table with fixed shelf Bolted/screwed construction for self-assembly—easy to transport and store Worktop reinforced from below with a waterproof laminated board for added stability and soundproofing Worktop without backsplash for unrestricted access from all sides Steel wire shelf mounted at 200 mm height (non-adjustable) Approx. permissible load on the countertop: 70 kg/m² Legs made from 40 × 40 mm profiles 4 low-noise swivel castors Ø125 mm, including 2 with brakes Dimensions: 1202 × 600 × (H) 850 mm Net weight: 30.789 kg Ideal as a mobile prep station, landing table or auxiliary work surface in kitchens where layout changes frequently. The braked castors help keep the table stable during cutting, mixing or portioning, while the lower shelf provides practical storage for GN containers, small appliances or frequently used mise en place. Thanks to its stainless-steel construction and waterproof underfilling, the table is well suited to demanding horeca use. Assemble according to the supplied bolted design and keep the surfaces clean as part of your regular hygiene routine.

Read more less

Built for demanding professional kitchens and prep areas, the HENDI Profi Line central table with shelf offers a hygienic stainless steel workstation with full access from all sides—ideal for efficient workflows in horeca environments. Its bolted, self-assembly construction makes it practical to transport, move into tight spaces, and store, while the reinforced worktop helps reduce noise and improve stability during daily service. Professional central work table with lower shelf (bolted construction for self-assembly) Dimensions: 1601 x 600 x (H) 850 mm Durable stainless steel construction Worktop reinforced with a laminated, waterproof strengthening and soundproofing board Approx. permissible load on the countertop: 70 kg/m² Non-adjustable shelf; distance from floor to lower edge of shelf: 160 mm Approx. permissible shelf load: 70 kg/m² Legs made of 40 x 40 mm profiles Adjustable feet: +25/-5 mm Net weight: 36.851 kg With its open design, this central table is well suited for prep work, plating, packing, and general kitchen organisation where multiple staff need access from different sides. The lower shelf provides convenient storage for GN containers, small appliances, or frequently used tools while keeping the worktop clear. For best results, assemble on a level floor and use the adjustable feet to compensate for uneven surfaces and maintain a stable, safe workstation during service.

Read more less

Equip your professional kitchen or prep area with the HENDI Profi Line wall table with shelf, designed for hygienic, space-efficient wall placement and everyday horeca workloads. The stainless steel construction, reinforced worktop and integrated splashback make it a practical choice for clean food prep, plating, and general back-of-house tasks where durability and easy wipe-down surfaces matter. Brand/line: HENDI Profi Line Wall table with lower shelf and 40 mm splashback to help protect the wall from stains Overall dimensions: 1800 x 599 x (H) 885 mm Made of stainless steel Bolted construction for self-assembly, supporting easier transport and storage Worktop reinforced with a laminated, waterproof strengthening and soundproofing board Approx. permissible load on the countertop: 70 kg/m² Non-adjustable lower shelf; distance from floor to lower edge of shelf: 160 mm Approx. permissible shelf load: 70 kg/m² Legs made of 40 x 40 mm profiles with adjustable feet (+25/-5 mm) Net weight: 37.946 kg The integrated lower shelf strengthens the overall structure while providing convenient storage for GN containers, small appliances or mise en place items close to the workstation. With its bolted design, this table is well suited for operations that need reliable stainless steel furniture that can be assembled on site. For best results in hygiene-focused environments, clean the stainless steel surfaces regularly as part of your standard kitchen sanitation routine, paying extra attention to corners around the splashback and shelf supports where residue can collect.

Read more less

Build a clean, efficient prep and plating area with the HENDI Profi Line wall table with shelf, designed for professional kitchens where hygiene and space optimisation matter. With a stainless steel build, integrated splashback and a reinforced, sound-dampened worktop, this bolted wall bench is ideal for daily mise en place, portioning and equipment staging along the wall. Professional wall table with lower shelf for added stability and storage Overall size: 1600 x 599 x (H) 915 mm Made of stainless steel (metal construction) Bolted construction for self-assembly, making transport and storage easier Worktop reinforced with a laminated, waterproof strengthening and soundproofing board Approx. permissible load on the countertop: 70 kg/m² 40 mm high splashback helps protect the wall against stains Non-adjustable lower shelf; distance from floor to lower edge of shelf: 160 mm Approx. permissible shelf load: 70 kg/m² Legs made from 40 x 40 mm profiles Adjustable feet range: +25 / -5 mm Net weight: 33.278 kg The 600 mm depth makes this bench a practical choice for most back-of-house layouts, providing a comfortable working surface without taking up unnecessary floor space. The lower shelf strengthens the structure and keeps frequently used items close at hand while maintaining clearance from the floor. Suitable for horeca environments where easy-to-clean, stainless steel furniture is required. Assemble according to the bolted design and use the adjustable feet to level the table on uneven floors for stable, safe day-to-day operation.

Read more less

Designed for busy prep and wash-up areas, the HENDI Profi Line table with 2 sinks and a lower shelf combines a hygienic stainless-steel work surface with integrated washing stations—ideal for professional kitchens that need efficient workflow in a compact 1000 x 600 mm footprint. The bolted, self-assembly construction makes transport and storage easier while still delivering a durable setup for daily horeca use. Professional stainless-steel table with 2 integrated sink bowls Overall size: 1000 x 600 x (H) 875 mm Sink bowl dimensions (each): 400 x 400 x (H) 250 mm Bolted construction for self-assembly Seamlessly bolted sink chamber pressed from one sheet of stainless steel Worktop with 10 mm embossing to help prevent water from spilling out Standard bottom embossing for siphon: Ø50 mm Tap hole: Ø30 mm Approx. permissible load on the countertop: 70 kg/m² 40 mm splashback to help protect the wall against stains Rear legs set 50 mm away from the wall to facilitate wall installation Legs made from 40 x 40 mm profiles with adjustable feet (+25/-5 mm) Lower shelf included; without filling, non-adjustable Distance from floor to lower edge of shelf: 160 mm Net weight: 23.109 kg With two bowls, this unit supports smooth separation of tasks such as rinsing and washing, making it a practical piece of auxiliary equipment for professional kitchens where hygiene and speed matter. The integrated splashback and raised worktop edge help keep surrounding areas cleaner during service. The lower shelf provides additional storage space for kitchen essentials, helping keep the workstation organised. Adjustable feet allow levelling on uneven floors for a stable working surface.

Read more less

Designed for demanding horeca back-of-house environments, the HENDI Profi Line sink table (bolted) offers a practical, space-efficient washing station with the sink positioned in the middle—ideal for prep areas, dishwashing corners and hygiene zones. Its self-assembly bolted construction makes transport and storage easier, while the stainless-steel build supports daily professional use. Brand/line: HENDI Profi Line Sink table with sink in the middle Bolted construction for self-assembly for easier transport and storage Stainless-steel construction; sink chamber pressed from one sheet of stainless steel and bolted seamlessly into the countertop Overall dimensions: 600 x 600 x (H) 890 mm Sink bowl dimensions: 400 x 400 x (H) 250 mm Standard bottom embossing for siphon: Ø50 mm Tap hole: Ø30 mm Worktop has a 10 mm embossing to help prevent water from spilling out Approx. permissible load on the countertop: 70 kg/m² 40 mm high splashback to help protect the wall against stains Rear legs offset 50 mm from the wall to facilitate wall installation Legs made of 40 x 40 mm profiles Adjustable feet: +25 / -5 mm Net weight: 11.645 kg With its compact 600 x 600 mm footprint, this sink table is a smart choice as auxiliary equipment in professional kitchens where every square metre counts. The raised splashback and embossed worktop support cleaner workflows by helping contain splashes and runoff during rinsing and handwashing tasks. The adjustable feet help level the unit on uneven floors, while the rear-leg offset makes positioning against a wall easier—useful for streamlined installation in tight service areas.

Read more less

Equip your professional kitchen with the HENDI Profi Line table with single wash trough – a robust, welded stainless-steel wash station designed for intensive use in prep areas, canteens and dishwashing zones. With a large basin for bulky utensils and high-volume produce washing, plus a practical splashback and front cover, it helps keep workflows efficient and the workspace clean. Brand: HENDI (Profi Line) Stainless-steel construction with welded build for high durability and stability Worktop reinforced with a laminated, waterproof and soundproofing board Single wash trough with 300 mm depth Embossed “envelope” base for complete water drainage Standard siphon embossing: Ø50 mm Standard tap hole: Ø30 mm 40 mm high splashback to protect the wall from stains Front cover included Legs made from 40 x 40 mm profiles; rear legs set 100 mm away from the wall to facilitate wall installation Leg height: 160 mm; adjustable feet: +25 / -5 mm Approx. permissible load on the countertop: 70 kg/m² Overall dimensions: 1000 x 600 x (H)875 mm Net weight: 20.884 kg Ideal as a basic hygiene and prep unit, the generous basin makes it easy to rinse gastro containers, pots, trays and large quantities of fruit and vegetables. The welded construction delivers a stable, professional-grade workstation suited to demanding daily service. Designed with standard openings for tap and siphon installation, this table integrates smoothly into common kitchen plumbing setups. Adjustable feet help level the unit on uneven floors for safe, steady operation.

Read more less

Equip your prep kitchen or dishwashing station with the HENDI Table with single wash trough – welded, a durable stainless-steel wash unit designed for daily horeca workloads. With a large, deep basin and a stable welded construction, it’s ideal for rinsing bulky utensils and handling high volumes of fruit and vegetables while keeping your workspace organised and hygienic. Brand: HENDI (Profi Line) Stainless-steel construction with welded build for durability and stability Overall size: 800 x 600 x (H) 875 mm Wash trough depth: 300 mm Approx. permissible load on the countertop: 70 kg/m² Embossed “envelope” base to help fully drain water from the trough Standard siphon embossing: Ø50 mm Tap hole: Ø30 mm (standard tap opening) 40 mm splashback to help protect the wall from stains Front cover included Legs made of 40 x 40 mm profiles; rear legs set 100 mm away from the wall for easier wall installation Leg height: 160 mm; adjustable feet range: +25 / -5 mm Worktop reinforced with a laminated, waterproof and soundproofing board Net weight: 17.948 kg This single-bowl wash table is a practical base unit for professional kitchens, canteens, preparation areas and wash-up zones where a robust, easy-to-clean stainless-steel workstation is essential. The deep trough and draining embossing support efficient rinsing and cleaning, while the splashback and front cover help keep the area neat during service.

Read more less

The Olympia wall-mounted bottle holder (large) is a sturdy, safe solution for neat and fast dispensing of spirits behind the bar. Suitable for bottles from 0.7 to 1.5 litres and easy to mount to a wall or table. Capacity: for 1 bottle up to 1.5L (suitable for bottles from 700ml to 1.5L) Dimensions: 39(h) x 10.5(d) cm Convenient quick-release mechanism for fast bottle changes Can be used with 25ml, 35ml and 50ml spirit measures (sold separately) Prevents waste when used with a spirit measure Weight: 90 g Colour: silver Ideal for busy bars where speed and consistency matter: mount the bottle holder in a fixed position and swap bottles in no time thanks to the quick-release system. This keeps your worktop clear and helps you work more efficiently during peak times. Combine with a suitable spirit measure for controlled output per shot and reduced wastage. A practical choice for hospitality venues, event locations and any professional back bar.

Read more less

Make your Vogue storage rack mobile with this set of Vogue castors (4 pieces). Ideal for moving heavy loads easily and setting up your storeroom or kitchen flexibly. Set of 4 castors: 2 braked and 2 unbraked Thread: 23mm Colour: black Heavy-duty design for easy movement of heavy loads Weight: 2.09kg The castors are supplied in sets of 4 and are intended for Vogue storage racks. Thanks to the two braked castors, you can secure the rack firmly in the desired position.Practical for busy professional kitchens where you want to be able to clean quickly, rearrange, or move stock without lifting.

Read more less

The Vogue GN 1/1 rack trolley with 20 levels is a robust stainless steel transport trolley for safely and quickly moving gastronorm pans in the professional kitchen. Ideal for mise en place, service and storage logistics, with smooth-running swivel castors for easy transport. Capacity: 20x GN 1/1 20 levels, designed for GN 1/1 pans 68 mm space between the shelves; suitable for all GN pan depths Maximum load capacity: 80 kg Dimensions: 170(h) x 38(w) x 55.7(d) cm Material: stainless steel Weight: 14.5 kg 4 heavy-duty swivel castors for easy transport, 2 braked (front) Supplied flat-packed and easy to assemble The strong stainless steel construction is designed for intensive professional use and provides a stable, organised way to transport up to 20 GN 1/1 pans. Thanks to the braked wheels, you can secure the trolley in a controlled manner during loading and unloading. Maintenance is simple: cleaning can be done quickly with a cloth and soapy water, so the rack trolley remains easy to use in busy kitchen operations.

Read more less

The Bolero metal clothes rail is a robust, mobile garment rack for professional use in cloakrooms, hotel rooms and B&Bs. Thanks to the sturdy steel construction and swivel castors, you can move the rack easily, while guests or staff can hang their clothing neatly and safely. Capacity: up to 30 garments Dimensions: 174(h) x 185(w) cm Material: metal (strong steel construction) Weight: 9.5 kg Colour: silver Suitable for standard hook hangers and security collar hangers Fitted with swivel castors for easy manoeuvrability Easy to assemble Supplied without hangers This garment rack is ideal for cloakroom areas where flexibility matters: place it quickly wherever you need extra hanging space and roll it away again after use. The hanging rail is suitable for both standard hangers and security collar hangers, making the rack widely applicable.

Read more less

The Rubbermaid lockable box for cleaning trolley L658 is a sturdy, lockable storage solution for the L658 housekeeping cart. Ideal for transporting chemicals safely and neatly during cleaning rounds. Brand: Rubbermaid Suitable for housekeeping cart/cleaning trolley L658 Lockable (with lock) Sturdy construction for professional use For storing chemicals Colour: black and yellow Weight: 3.55 kg This lockable box helps keep cleaning agents neatly organised and limits unwanted access during on-site use. A practical addition to a professional cleaning cart setup.

Read more less

The Rubbermaid stool is a compact, manoeuvrable aid for use in the kitchen, warehouse or dishwashing area. Thanks to the castors, you can move the stool easily, while they automatically lock as soon as weight is applied for extra stability during work. Manoeuvrable stool on castors Castors lock under load for stable use Maximum load capacity: 160 kg Height: 33 cm Weight: 2.69 kg Ideal for tasks where you need just a little extra working height, without compromising on safety. Thanks to its low weight, the stool is easy to move and quickly deployable at different workstations.

Read more less

The Jantex Servo-x linen trolley is a versatile, space-saving trolley for quick housekeeping rounds. Thanks to the foldable frame, it can be stored compactly, while the 220L bag offers sufficient capacity for linen in hotels and B&Bs. Capacity: 220 litres Folds down to 1/5 of the original size (approx. 20%) for easy storage Dimensions unfolded: 98.5(h) x 62(w) x 62(d) cm Dimensions folded: 114(h) x 58.5(w) x 11.9(d) cm Weight: 11 kg 4 non-marking swivel castors for smooth manoeuvrability Closing clips to easily remove, replace and keep the bag closed Spare bags (220L) available separately (code L616) The non-marking swivel castors make the trolley easy to manoeuvre in corridors and rooms, without leaving marks on the floor. Ideal when you want to work efficiently with a trolley that takes up minimal space after use. With the easy-open clips, you can change the bag quickly, helping you keep the workflow in the linen room and on the floors running smoothly. A practical choice for intensive daily use in hospitality.

Read more less

The Jantex semi-mobile bag trolley is a practical solution for quick and hygienic waste disposal in the hospitality sector. Thanks to the rear wheels, it is easy to move, while the foot operation enables hands-free working. Dimensions: 81(h) x 43.2(w) x 52(d) cm Material: steel Weight: 7 kg Finish: white painted finish Mobility: two wheels at the rear Stability: rear wheels and four legs Operation: foot pedal for hands-free use Use: easy-to-replace bags Ideal for kitchens, dishwash areas and serving points where speed and cleanliness matter. The combination of a steel construction and a clean white coating makes this bag trolley suitable for intensive daily use. Thanks to the stable stance with four legs, it stays firmly in place while changing bags, and you can then move it effortlessly to the desired location.

Read more less

The Jantex squeegee handle is a lightweight, anodised aluminium handle of 128cm for professional cleaning. Combine this handle with the separate squeegees CF246, CF248 and L478 for efficient window and floor cleaning, allowing you to remove liquid quickly and in a controlled manner. Brand: Jantex Length: 128cm Material: aluminium with anodised finish Colour: black Weight: 410g Suitable for squeegees: CF246, CF248 and L478 Long handle for cleaning hard-to-reach areas Thanks to the anodised finish, the handle is extra durable and highly resistant to intensive daily use. The low weight makes prolonged work comfortable, ideal for cleaning rounds in hospitality, pantries and sanitary areas.A practical choice for those looking for a reliable, long handle that fits perfectly with Jantex squeegees for a neat, streak-free result.

Read more less