HENDI

Built for busy professional kitchens and bars, the HENDI hood dishwasher with electronic controller delivers fast, consistent washing for plates, cutlery, glassware, cups, trays and GN 1/1 containers. Designed to be extremely easy to use, clean and service, it combines a touch electronic control panel with powerful heating and smart safety functions—ideal for horeca operations where turnaround time and hygiene standards matter. Hood-type commercial dishwasher with electronic control and touch control panel Suitable for washing plates, cutlery, glassware, cups, trays and GN 1/1 containers Maximum plate height: 400 mm; maximum glass height: 395 mm Three wash programs: 60 / 120 / 240 seconds, plus compartment washing program Option for final rinse with cold water (especially useful for glassware) “THERMO-PROTECTOR” system helps prevent rinsing with cold water Wash water temperature: 60°C; rinse/scald temperature: 85°C Boiler capacity/output: 13.5 l / 7.5 kW; tank capacity/power: 68 l / 6.0 kW Cleaning pump power: 1.5 kM; pump sealing factor: IP44 Electronic water thermometers for boiler and bath (separate readouts) Safety thermostat: boiler up to 105°C; bath up to 99°C AISI 304 stainless steel housing with stainless steel upper and lower wash/rinse arms Built-in springs to assist hood lifting; door microswitch enables operation when hood is raised ECO function reduces power consumption after 15 minutes of non-use 8-point self-diagnostic system; “SOFT START” gradually increases pump pressure to protect delicate dishes Corner installation possible Water connection: ¾" Includes: 1 universal glass basket 500x500x(H)105 mm, 1 plate basket with pins (5x8 pcs) 500x500x(H)105 mm, 1 cutlery basket 110x110x(H)130 mm Standard equipment: rinse aid and detergent dispenser, drain pump Supplied with water hose (1.5 m, ¾" female thread), drain hose, and electric cable without plug Unit dimensions (L×W×H): 900 × 745 × 1406 mm Net weight: 105.5 kg This hood dishwasher is a practical choice for restaurants, canteens and catering kitchens that need reliable throughput and flexible cycles, including a dedicated option for glassware handling. The included baskets and built-in chemical dispensers help streamline workflow from loading to final rinse. For installation planning, note the ¾" water connection, supplied hoses, and

Read more less

Built for busy professional kitchens, the HENDI Kitchen Line 4-burner gas cooker on open stand delivers flexible heat output for sautéing, boiling and sauce work across multiple stations. Its stainless steel construction and cast iron pan supports make it a robust, practical choice for horeca environments where reliability and easy day-to-day use matter. 4-burner configuration with 2 × 6.0 kW burners and 2 × 3.5 kW burners (total 19 kW) Burners equipped with thermocouple for added safety Suitable for pans from Ø 120 to 300 mm Stainless steel body with cast iron pan supports and burners Open stand design with height-adjustable legs and non-slip feet Suitable for natural gas; LPG conversion set included Manual lighting required (no pilot light or ignition) – light with matches or a lighter Dimensions: 722 × 804 × (H) 898 mm Net weight: 39.77 kg The mix of high-power and medium-power burners helps you run fast service while keeping delicate preparations under control. Cast iron supports provide stable pan placement, and the adjustable feet help level the unit on uneven kitchen floors. For installation and daily operation, plan for manual ignition and ensure the correct gas type is used; the included conversion set allows switching to LPG where required. Clean the stainless steel surfaces regularly to keep the cooker looking professional and ready for service.

Read more less

Speed up service and ensure consistent portions with the HENDI pie cutter—an efficient kitchen tool for bakeries, cafés and professional pastry stations. Designed to divide round pies or cakes into equal slices, it helps deliver uniform presentation and reliable portion control. Divides round pies or cakes into 12 equal portions Suitable for products up to ø320 mm Made from stainless steel (metal) Dimensions: 320 x 320 x 40 mm Net weight: 0.455 kg Ideal for high-volume slicing in horeca environments where speed and consistency matter, this cutter supports standardised serving sizes for buffets, dessert counters and takeaway portions. For best results, align the cutter centrally over the pie or cake before pressing down to create evenly spaced cuts in one operation.

Read more less

Serve perfectly aerated whipped cream in seconds with the HENDI cream whipper—an essential tool for fast-paced horeca service in coffee bars, dessert stations and professional kitchens. With a 0.5 L capacity and a durable aluminium build in a modern taupe finish, it’s ideal for consistent portioning and clean presentation on hot drinks, pastries and plated desserts. Brand: HENDI cream whipper for professional whipped cream preparation Capacity: 0.5 L Colour: taupe Made completely of aluminium Supplied with 3 polypropylene nozzles and a cleaning brush Requires an N₂O cream charger to operate (not included) Not suitable for hot sauces Not dishwasher safe Dimensions: 145 x 80 x 326 mm (L x W x H); diameter Ø80 mm Net weight: 0.645 kg Use the included nozzles to vary the finishing style for desserts, waffles, cakes and beverage toppings, helping standardise output during service. The aluminium construction keeps the whipper lightweight and practical for daily use behind the counter. For best results and longevity, clean using the included brush and avoid dishwasher cleaning. Always use with compatible N₂O cream chargers (sold separately) and do not use for hot preparations.

Read more less

Bring fast, consistent whipped-cream service to your bar, café or dessert station with the HENDI cream whipper in pastel green. This 0.5 L professional whipper is made from aluminium and comes with multiple nozzles for clean, controlled piping—ideal for high-speed plating and attractive presentation. Brand: HENDI Cream whipper with 0.5 L capacity Colour: pastel green Made completely of aluminium Supplied with 3 polypropylene nozzles and a cleaning brush Requires an N₂O cream charger to operate (not included) Not suitable for hot sauces Not dishwasher safe Dimensions: 145 x 80 x (H) 326 mm (⌀ 80 mm) Net weight: 0.575 kg Use this whipped cream tool for preparing and dispensing whipped cream quickly during service, with interchangeable nozzles to suit different finishes on desserts, beverages and plated presentations. For best results and to protect the aluminium body, clean by hand after use and use the included brush to keep the nozzles and internal parts hygienic and ready for the next service.

Read more less

Serve perfectly aerated whipped cream in seconds with the HENDI cream whipper in pastel yellow—a practical tool for busy horeca kitchens, cafés and dessert stations. With a 0.5 L capacity and a lightweight aluminium construction, it helps you portion consistent toppings for coffees, pastries and plated desserts while keeping service fast and clean. Brand: HENDI Cream whipper with 0.5 L capacity Colour: pastel yellow Completely made of aluminium Includes 3 polypropylene nozzles and a cleaning brush Requires an N₂O cream charger to operate (not included) Not suitable for hot sauces Not dishwasher safe Dimensions: 145 x 80 x 326 mm (L x W x H); diameter 80 mm Net weight: 0.635 kg Ideal for finishing desserts, waffles, cakes and hot drinks with fresh whipped cream on demand. The included nozzles give you flexibility in presentation, while the cleaning brush supports quick manual cleaning between services. For best results and hygiene, wash by hand after use and avoid using the whipper for hot preparations, as it is not suitable for hot sauces.

Read more less

Speed up service behind the bar with the BarUp Free-flow pourer long in silver. Designed for smooth, controlled free pouring, this long pourer helps bartenders and baristas portion spirits and syrups more efficiently while keeping bottles neatly sealed thanks to the integrated plastic stopper. Brand: BarUp Type: long free-flow pourer Includes a plastic stopper for sealing the bottle neck Colour: silver Materials: metal with stainless steel components Dimensions: 30 x 30 x 112 mm Net weight: 0.013 kg Ideal for busy cocktail stations, speed rails and coffee bars, this pourer supports quick, consistent pours during peak hours and helps reduce drips around the bottle neck for a cleaner workstation. For best results, keep the pourer clean between product changes to maintain smooth flow and hygiene in professional bar operations.

Read more less

The HENDI Pizza Oven BASIC XXL 66 is a high-capacity electric deck oven designed for busy horeca pizza service, combining a robust metal construction with practical, no-nonsense operation. With 2 separate baking chambers, independent heat control and internal lighting, it’s built to keep pace during peak hours while delivering consistent results on refractory brick decks. 2-chamber pizza oven for higher output and flexible baking Temperature range: 45°C to 455°C Independent thermostats for top and bottom heaters in each chamber Separate thermometer for each chamber for clear temperature monitoring Internal lighting for fast visual checks during service Refractory bricks in each cooking chamber Stainless steel front with steel frame construction Rock wool insulation to help retain heat Internal chamber dimensions (each): 1080 x 720 x (H)140 mm (2 chambers) Overall dimensions: 1365 x 968 x (H)745 mm Input power: 18000 W Net weight: 205.295 kg Compatible with HENDI oven stand, code 227206 Each chamber has its own heating elements (top and bottom) and separate temperature indication, making it easy to run different products or baking profiles side by side—ideal for pizzerias, takeaways, restaurant kitchens and high-volume catering. Mechanical controls keep operation straightforward for kitchen teams, while the insulated build and brick decks support stable baking conditions. For an ergonomic working height and a streamlined setup, pair the oven with the compatible HENDI stand (code 227206).

Read more less

Speed up pizza prep and keep portions consistent with the HENDI pizza sauce spoon—designed for efficient sauce ladling and spreading on pizza bases in busy pizzerias, restaurants and takeaway kitchens. The bent handle offers better control during portioning, while the flat bottom helps distribute sauce quickly and evenly. Brand: HENDI Pizza sauce spoon for portioning and spreading sauce Bent handle for ergonomic, controlled operation Flat bottom to ease spreading across the dough Made of stainless steel (18/8); also listed as 18/10 stainless steel Handle with hanging hole for convenient storage Dishwasher safe Suitable for food contact Dimensions: 280 x 66 x 90 mm Net weight: 0.14 kg Available in 2 sizes Ideal for portioning pizza sauce with repeatable results, this spoon helps streamline mise en place and supports faster service during peak hours. The hanging hole keeps it within reach on hooks or rails, while stainless steel construction and dishwasher-safe design make it practical for daily professional use.

Read more less

Portion and spread pizza sauce quickly and consistently with the HENDI Pizza Sauce Spoon—an essential tool for busy pizzerias, pizza stations and prep kitchens. Designed for controlled serving and smooth spreading, it helps streamline your workflow while keeping portions uniform across every base. Brand: HENDI Pizza sauce spoon for portioning and spreading sauce Bent handle for ergonomic handling and precise control Flat bottom supports easy, even sauce spreading Hanging hole in the handle for convenient storage Suitable for food contact Dishwasher safe for easy cleaning Made from stainless steel (18/8); also specified as 18/10 stainless steel Dimensions: 382 x 66 x 124 mm (L x W x H) Net weight: 0.16 kg Available in 2 sizes Ideal for building pizzas during service, this spoon helps you portion sauce reliably and spread it efficiently across the dough, supporting consistent results and faster prep. For best day-to-day handling in professional kitchens, store it on a utensil hook using the hanging hole and clean it in the dishwasher after service.

Read more less

Streamline prep, storage and service with the HENDI Profi Line GN 1/3 container with dropped (retractable) handles—an essential gastronorm pan for busy professional kitchens. Made from durable 18/10 stainless steel with smooth edges, it’s designed for hygienic handling, fast cleaning and reliable performance across hot and cold applications. Brand: HENDI (Profi Line) Gastronorm size: GN 1/3 Capacity: 7.8 L Dimensions: 332 x 175 x 200 mm (L x W x H) Net weight: 1.023 kg Material: 18/10 stainless steel (metal) Retractable/dropped handles for easier transport and service Smooth edges for safe handling and easy cleaning Excellent corrosion resistance Temperature resistant from -40°C to 300°C Suitable for food contact and dishwasher safe Compatible with convection ovens, refrigerators, bain-marie systems and chafing dishes Ideal for mise en place, hot holding and buffet service, this GN container moves easily between kitchen stations thanks to its retractable handles—helping reduce spills and improving grip during transport. Built for everyday horeca use, the stainless-steel construction supports consistent hygiene standards and stands up well to frequent washing and intensive use in professional environments.

Read more less

Keep prep, storage and service organised with the HENDI GN 1/3 lid with handle recess, designed for busy professional kitchens using GN Profi Line containers. Made from durable 18/10 stainless steel, this lid helps protect contents, supports efficient stacking, and performs reliably across hot and cold applications—from refrigerated storage to bain-marie and convection oven use. Brand: HENDI GN size: GN 1/3 Dimensions: 324 x 176 x 24 mm Net weight: 0.333 kg Made of 18/10 stainless steel with smooth edges With handle recess for easier lifting and handling Stackable design to optimise storage space Suitable only for GN Profi Line containers Temperature resistance: -40°C to 300°C Suitable for food contact Dishwasher safe Compatible with convection ovens, refrigerators, bain-marie systems and chafing dishes Ideal for mise en place, cold storage, and hot holding, this GN lid supports hygienic workflows by keeping food covered during transport and service. The recessed handle improves usability in tight pass areas and on buffet lines, while the stainless-steel construction is built for intensive daily use. For best fit and performance, use this lid exclusively with matching GN Profi Line containers and clean easily in the dishwasher after service.

Read more less

Keep your mise en place protected and service-ready with the HENDI GN 1/2 lid with handle recess, designed for professional use with GN Profi Line containers. Made from durable 18/10 stainless steel with smooth edges, it supports efficient food storage, hygienic transport and reliable performance across hot and cold kitchen workflows. Brand: HENDI GN size: GN 1/2 Dimensions: 265 x 325 x 28 mm Net weight: 0.501 kg Made of 18/10 stainless steel (metal) With handle recess for easier lifting and handling Stackable design to optimise storage space Temperature resistance: -40°C to 300°C Suitable only for GN Profi Line containers Dishwasher safe Suitable for food contact Ideal for prep stations, cold storage and hot holding, this lid helps maintain product quality while streamlining back-of-house operations. It can be used in convection ovens, refrigerators, bain-marie systems and chafing dishes, making it a versatile choice for busy horeca kitchens. For best results, pair it with matching GN 1/2 Profi Line containers to ensure a proper fit and efficient stacking. After service, simply run it through the dishwasher for quick turnaround.

Read more less

Keep your mise en place protected and service-ready with the HENDI GN 1/1 lid with handle recess, designed for demanding professional kitchen workflows. Made from durable 18/10 stainless steel and built specifically for GN Profi Line containers, it helps maintain hygiene, reduce heat loss and support efficient storage from prep to pass. Brand: HENDI GN size: GN 1/1 Designed for GN Profi Line containers only Includes handle recess for easier handling Made of 18/10 stainless steel with smooth edges Temperature resistance: -40°C to 300°C Stackable for space-saving storage Dishwasher safe Dimensions: 530 x 324 x 28 mm Net weight: 1.082 kg Suitable for food contact, this lid is ideal for covering GN containers in convection ovens, refrigerators, bain-marie systems and chafing dishes. The robust stainless-steel construction supports long-term use in busy horeca environments while the stackable design helps keep your storage areas organised. For best results, pair with compatible GN 1/1 Profi Line containers and clean in the dishwasher for fast turnaround between services.

Read more less

Keep your mise en place protected and service-ready with the HENDI Lid with handle recess for GN 1/3 Profi Line containers. Designed for professional horeca kitchens, this stainless-steel lid delivers a secure, hygienic cover for prep, storage and hot holding, while the recessed handle makes lifting easy and helps keep your GN set-up neat and stackable. Brand: HENDI GN size: GN 1/3 Dimensions: 325 x 175 x 24 mm Net weight: 0.376 kg Suitable only for GN Profi Line containers Recessed handle for practical lifting and handling Silicone rim included for a secure fit Stackable design for space-saving storage Made of 18/10 stainless steel with smooth edges Temperature resistant from -40°C to 300°C Suitable for convection ovens, refrigerators, bain-marie systems and chafing dishes Dishwasher safe Suitable for food contact Ideal for covering GN inserts during prep, holding and transport in the kitchen pass, this lid helps reduce heat loss and protects contents from contamination. The silicone rim supports a snug, stable placement on compatible Profi Line GN containers. Built for intensive daily use, it handles both hot and cold applications and cleans quickly in the dishwasher. For efficient back-of-house organisation, the stackable format helps streamline storage on shelving and in refrigerated stations.

Read more less

Optimise your GN storage and service workflow with the HENDI Lid with handle recess for GN 1/2 Profi Line containers. Designed for a secure, professional fit, this stainless-steel lid features a practical recessed handle for easy lifting and a silicone rim to support tight, hygienic coverage in busy horeca kitchens. Brand: HENDI GN size: GN 1/2 Dimensions: 265 x 325 x 28 mm Net weight: 0.571 kg Made of 18/10 stainless steel with smooth edges Includes silicone rim Recessed handle for convenient handling Stackable design for space-saving storage Suitable only for GN Profi Line containers Temperature resistant from -40°C to 300°C Suitable for food contact and dishwasher safe Usable in convection ovens, refrigerators, bain-marie systems and chafing dishes Ideal for prep, storage, transport and service, this lid helps keep contents protected while supporting fast access during mise en place and service. The stackable construction makes it a practical choice where GN containers are stored in high volumes. For best results, pair exclusively with compatible GN Profi Line containers. After use, simply run through the dishwasher for efficient cleaning and turnaround.

Read more less

Keep gelato, sorbet and ice cream service-ready with the HENDI Profi Line round ice cream container. Designed for professional horeca use, this 7.3 L stainless-steel tub is ideal for hygienic storage and efficient handling in busy kitchens, ice cream stations and dessert prep areas. Capacity: 7.3 L Round container with 200 mm diameter Dimensions: 200 x 200 x (H)245 mm Made from polished 18/8 stainless steel Material thickness: 0.8 mm Rounded edges help make cleaning easier Suitable for use in refrigerators and freezers Dishwasher safe Net weight: 0.965 kg Lid sold separately (HENDI 802076) The polished stainless-steel finish supports a professional presentation while standing up to everyday service. Rounded internal edges reduce residue build-up, helping speed up turnaround between flavours and simplifying hygiene routines. For covered storage, pair with the matching lid (802076), sold separately. After service, the container can go straight into the dishwasher for convenient cleaning.

Read more less

Speed up pastry prep and portioning with the HENDI 7 Wheel dough cutter—designed for efficient, consistent cutting in busy professional kitchens and bakeries. With seven smooth stainless steel wheels and an easily adjustable cutting width, it’s ideal for creating uniform strips and sections of dough for a clean, professional finish. Professional dough cutter with 7 smooth cutting wheels Cutting width can be easily adjusted for flexible portioning Cutting wheels: Ø55 mm Made from metal, using 18/8 stainless steel Dimensions: 222 x 80 x (H)55 mm Net weight: 0.86 kg Suitable for baking and pastry applications where repeatable results matter, this multi-wheel cutter helps streamline production when working with dough sheets and similar preparations. The smooth wheels support clean cuts and consistent spacing with minimal effort. For best results, keep the cutting wheels clean between tasks to maintain smooth rolling and precise cutting performance.

Read more less